Introduction
The NS-200FT is a Ethernet(10/100Base-TX) to Fiber Optic(100Base-FX) converter. The Ethernet supports 10/100M auto-negotiation feature and auto MDI/MDIX function.
The NS-200FT operates at either half or full duplex mode. In full duplex mode, range is 2km with 62.5/ 125£gm fiber cables; in half duplex mode, range is 412m with 62.5/ 125£gm fiber cables.
It contains "soft start" function with overload protection, high-low voltage protection.
The width of the NS-200FT is just 32.30 mm, so it can be used where space is important.
Features
Automatic MDI / MDI-X crossover for plug-and-play
Each port supports both 10/100 Mbps speed auto negotiation
Store-and-forward architecture
Full duplex IEEE 802.3x and half duplex backpressure flow control
1.4Gbps high performance memory bandwidth.
Integrated look-up engine with dedicated 1 K unicast MAC addresses.
MTBF = 438,000 hours( Temperature is 25 ¢X)
MTBCF = 525,600 hours ( Temperature is 25 ¢X)
Supports +10~+30Vdc voltage
Supports operating temperatures from 0 ~ +70¢XC
DIN rail mount for industrial usage
Specifications:
Compatibility
IEEE 802.3, IEEE802.3u, IEEE802.3x
Interface
10/100 Base-T and 100 Base-FT
Ethernet Port
10/100 Mbps x 1
Fiber Optic Port
100 Mbps x 1
ESD Protection
8 KV Contact Discharge 15KV Air-Gap Discharge
Fiber Optic Transmission distance
Multi mode fiber:50/125, 62.5/125 or 100/140 £gm Multi mode fiber,412 m for half duplex, 2 km for full duplex.
Ethernet Cables
10 Base-T (Cat.3, 4,5 UTP cable; 100m Max.) 100 Base-T (Cat.5 UTP cable; 100m Max.)